What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 01:04

Because the load is inductive, the current lags the voltage.(by a bit).
It seems Mohan does not understand the difference between a comment and an Answer.
but this device (an Inductor) … impedes the rapid changes in the current.
How do we greet in German, French, Spanish, and Italian?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
One is “what exactly is in a ‘surge protector’ ? ”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This one hit behind the barn.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Why do I get stressed when I go to bed?
It also is a device that limits the change in current flow.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What is lightning?
One
The MOV will conduct when the voltage exceeds 50% of line voltage.
At one ohm, the resistor has a maximum of 1 watt power.
First Sentence:
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–10[John johnson John Johnson ]
Should India conduct another air strike to attack Pakistan over the Pahalgam attack?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There are two important concepts here.
Most companies are already raising prices or plan to because of tariffs, data shows - CNBC
This is the picture of an electronic coil of wire wound around a core of magnetic material.
what exactly is a ‘surge’ protector?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is where the MOV conducts again, and dissipated the energy.
(Dc diagram shown, AC is similar).
nine
How much of lounge pianists playing is from repertoire, and how much is improvised?
In schematic diagrams this is the symbol for a fuse:
[image of Common-mode choke]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
the problem then depends on "how fast does the fuse operate?".
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Now when you have a certain ac resistance, then a current flows in a loop.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then describes Rainy Season and Lightning.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
He then describes the function of a fuse.
An AC voltage/ current source, and an ac inductive load.
I post the exact comment here.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The bolt then partially travels down the line to your home.
[old diagram got deleted by accident]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The third is lightning and “how it gets conducted into a home.”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But it can get overloaded, and no longer works.
2024–10–16 [ OO OLAOYE OYEBODE ]
so, what happens?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
but I think this circuit , shows a few more pieces.
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then asserts :
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
A circuit breaker is similar, but is resettable.
Barnstars:
There are three different concepts here that are getting confused.
Upvotes:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This device then solves the entire problem.
A fuse is a non-resetable over current circuit protector.
Here is a simplified AC power diagram.
Edit 2024–10.
a photo is worth a thousand words.
These are simplified answers to the original question, and does not change anything I wrote above.
At least they know the answer if they wanted it.
The other is “what does a “fuse” do?”
So, the voltage could go up to 500 volts, and the fuse will not open up.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is 'the assistant's answer'
eight